//
Changelog
What changed
Every release of Ball Tracer, newest first. Each entry says what that build does differently, and nothing it does not.
- Apex Height: raise or lower the top of the flight with a slider or a handle on the picture. Impact and landing stay where they are. Lowering a low shot a long way can make the path dip.
- Premiere Pro phone clips: fixed "has not taken a reference picture" on phone clips in 60 fps sequences.
- Premiere Pro Flight Time: dragging Flight Time now changes the flight by the right amount. In a project where you dragged it earlier, the trail length can differ.
- Diagnostics: if you said yes to diagnostics, reports now give us more detail, so we can fix problems faster. Never your footage, file names or personal details. The privacy page lists everything. If you said no, nothing is sent.
- Trimmed camera files: a clip cut without re-encoding with a few odd frames at its very end is no longer refused. Those last frames are left out, so if the shot itself reaches one of them, that frame cannot be traced. Checked with our test clips.
- Portrait phone clips: read upright and traced. Checked with our test clips.
- Vertical sequences: a horizontal clip fitted into a vertical (9:16) sequence is traced. Tested on our own test clips so far.
- Phone clips: clips whose frame timing only wobbles now trace. A clip whose frame rate really changes can still be refused; convert it to a constant frame rate first.
- Small picture moves: a small picture move is traced through. Checked with our test clips.
- Upside down clips: no longer refused. Checked with our test clips.
- Estimated landings: when the ball leaves the top of the picture and you place a Landing marker, the trail now comes down onto the marker and the bend no longer jumps. The status line says when a landing is estimated and over which frames. Checked with our test clips.
- Divots: with Landing In Shot off, a divot moving along the grass no longer turns the trace into a short ground roll. Checked with our test clips.
- Camera moves after the shot: when the camera pans or the operator walks off after the shot and Ball Tracer loses track of the picture, the trail stays where it was instead of following a zoom that never happened. Checked with our test clips.
- Points: changing Points keeps the trail's shape. Going back to the earlier number of Points gives the exact curve back, and a hand-adjusted curve says how far fewer Points move it.
- Graded clips: a grade, LUT or colour management before Ball Tracer no longer stops Trace.
- Clearer messages: when a clip is changed before Ball Tracer, the message says whether it is the colours or the shape (zoom, crop, stabiliser, lens correction) and what to turn off. Pressing Trace again works once it is fixed.
- Zoom and position: small Inspector zooms and moves are followed, so the trail lands on the ball. A zoom that changes over the clip is refused with "Zoom changes over the clip".
- Speed ramps and freezes: a speed ramp or freeze inside the shot is no longer traced wrong; Ball Tracer asks you to play the shot once.
- Start and End: a Start or End past the clip's end on the timeline is held to the clip, and the message says so. A range entirely outside the clip is refused clearly.
- Changed frame rates: a clip whose frame rate was changed (Clip Attributes, Interpret Footage) gets a note on which Clip Frame Rate gives the ball its real speed.
- Landing marker: a Landing marker placed after End Frame now says it lands at End Frame, and which End Frame to set.
- Diagnostics: the optional reports now say why a trace was refused, and the video format (codec, resolution, frame rate, HDR or not). Never footage, file names or personal details.
- Licence: a key whose 12 months of updates ended before 25 October 2026 does not cover 0.2.2. The version it was bought for keeps working.
- Premiere Pro on Windows: Ball Tracer now runs in Adobe Premiere Pro too, from its own installer, under Video Effects, Ball Tracer. The same key activates it; on a computer with both programs, each one uses a seat.
- Tracing: the trail no longer bends when the camera moves, putts are followed to rest, and a coloured ball traces better.
- Landing: a Landing marker no longer cuts off the top of the arc, and a ball that lands after the cut ends the reveal on the clip's last frame.
- AutoZoom: off by default. Set its amount, length and offset; it ends on the landing, follows Flight Time, and no longer drifts sideways.
- Reveal: two new presets, Pitch and Chip and Run. Presets now work with Follow Ball off, and after each trace the reveal runs from impact to landing.
- Flight Time: shows the trace's real flight time and stays where you drag it.
- Hide Behind Objects: Only On The Way Down, on by default, and cleaner edges behind trees.
- AI Ball Finder: uses the fast graphics card on laptops, and on smaller PCs runs on the processor instead of failing.
- Update alerts: Ball Tracer tells you when a new version is out.
- Diagnostics: the question now says reports are linked to your licence, and anyone who said yes before is asked again. Nothing is linked until you answer.
- Fixes: the Ball Marks buttons confirm the trace again; trail handles no longer dent the trail and stay under the pointer when the camera moves; the Follow Ball animation is now Chase Ball; panel names, Look colours and the overlay match in Resolve and Premiere Pro.
- Support and install: Send to Support no longer freezes Resolve, and an interrupted install puts the previous version back.
- Licence: a key whose 12 months of updates ended before 24 October 2026 does not cover 0.2.1. The version it was bought for keeps working.
- AI Ball Finder (experimental): it looks for the ball for you. It works best on a ball in the air against the sky.
- Bounces: after it lands, the trail follows the ball through its bounces and roll, where the camera saw them.
- Fix With Ball Marks: click the ball on a few frames to fix a trace, or draw the path through all your marks. Mark Is Impact and Mark Is Landing set where the flight starts and ends.
- Landing In Shot: for chips and shots to the green, the trace follows the ball down to where it lands.
- Impact and landing markers: double-click the Ball At Impact or Landing marker to set that frame.
- Flight Time: filled in after every trace; change it to retime the flight.
- Looks and animations: three looks (Paper Ribbon, Broadcast Tube, Flow Dash) and three animations (Peak Wipe, Comet Trail, Overlap Dissolve), each with its own settings.
- Overlap Shadow: where a trail crosses itself, as on a head-on shot, the climb casts a soft shadow so the two stay apart.
- Hide Behind Objects: the trail can pass behind a tree or a player in front of the ball. Clean Sky smooths the grain out of the sky.
- Bend points: curve any stretch of the path between two handles.
- Snap and Drop: the new default animation; on a traced shot the trail's head follows the ball.
- Any frame rate: 23.976, 24, 25, 50 and 60 fps clips trace on a timeline of any of those rates (a 24 or 25 fps clip on a 60 fps timeline traces a little weaker).
- Less to set up: Ball Tracer works out the horizon and the camera itself, so the horizon control and the tracker boxes are gone. Link Path to Trackers is now Link Path to Camera.
- Separate tracing program: tracing runs in its own program beside Resolve, so you may see it in Task Manager.
- A shorter panel: the main steps sit at the top; the fine settings start closed.
- Faster tracing: quicker, with the same result.
- Licensing: the licence server's security was updated as a precaution. Earlier builds can no longer activate, so install this one.
- Nothing else changed: tracing and rendering work exactly as in 0.1.0.
- First public release: Ball Tracer for DaVinci Resolve Studio on Windows.
- A setup wizard installs the plug-in into Resolve's OpenFX folder and offers Repair, Reinstall and Remove when Ball Tracer is already installed.